Basic requirements for containers and packaging materials related to container matching
Release time:
2024-04-22
1. Bottle The bottle body should be stable, with a smooth surface, and the thickness of the bottle wall should be basically uniform, without obvious scars or deformations, and there should be no cold explosions or cracks. The bottle mouth should be upright and smooth, without burrs (burrs), and the thread and clamp fitting structure should be intact and upright. The fit between the bottle and the cap should be tight, without slipping, loosening, or leakage. The inside and outside of the bottle should be clean.
1. Bottle
The bottle body should be stable, with a smooth surface, and the thickness of the bottle wall should be basically uniform, without obvious scars or deformations, and there should be no cold explosions or cracks. The bottle mouth should be upright and smooth, without burrs (burrs), and the thread and clamp fitting structure should be intact and upright. The fit between the bottle and the cap should be tight, without slipping, loosening, or leakage. The inside and outside of the bottle should be clean.
2. Hoses
The body of the hose should be smooth, neat, with uniform thickness and no obvious scratches, and the color should be uniform and consistent. The sealing of the hose should be firm and upright, without any openings or wrinkles (except for normal indentation on the mold). The composite film of the hose should have no floating phenomenon.
3. Lid
Inner cover: The inner cover should be complete, smooth, clean, and not deformed. The fit between the inner cap, bottle, and outer cap should be good. The inner cover should not be missed.
Outer cover: The outer cover should be upright, smooth, without breakage, cracks, burrs (burrs). The color of the outer cover should be uniform and consistent. The thread fitting structure of the outer cover should be intact, and the color of the outer cover with anodized or hot stamping should be uniform and consistent. The flip over type outer cover should be flipped up flexibly, and the connecting part should be flexible
There is no fracture in the position. The fit between the cap and bottle should be tight, without slipping or loosening.
4. Spray cans.
The tank body should be flat, without rust spots, with smooth welds and no obvious scratches or dents. The color should be uniform and consistent. The crimp of the spray tank shall be smooth without wrinkles, cracks and deformation. The cover of spray tank shall meet the requirements of 5.3.2.
5. Spray nozzle.
The nozzle should be upright, clean, and free from damage and cracks. The assembly components of the nozzle should be complete and flawless to ensure smooth spraying at night.
Related News